- Home
- Services/IndustriesServicesindustries
- About Us
- LocationsStatesAccordion ContentAccordion ContentAccordion ContentAccordion Content
- Job Openings
- Quick Links
- ATS Family
MIL-STD-810 Dust Testing
Applied Technical Services provides MIL-STD-810 Dust Testing utilizing our cutting-edge environmental testing laboratory.
What is MIL-STD-810 Method 510?
The MIL-STD-810 Method 510 is a military standard that tests the long-term survivability of devices in sandy and dusty environments such as deserts. The test evaluates potential mechanical issues that may arise due to sand and dust penetrating cracks and crevices, obstructing opening, and disrupting bearings and joints. This method tests two types of materiels; sand and dust. The military standard defines a dust particle as less than 150 micrometers in diameter and sand particles as 150-850 micrometers in diameter.
How does Method 510 work?
MIL-STD-810 Sand Testing breaks down into two procedures:
- Procedure 1 – Six-hour test of blowing dust between 1.5 to 10 meters per second velocity
- Procedure 2 – 90-minute test of blowing sand at about 18 meters per second velocity
- A final 10-minute operation test to ensure proper functionality of the device
Once both procedures are complete, ATS technicians examine and evaluate the device for any potential issues such as electrical and thermal performance, visual damage such as abrasions and paint chipping, as well as overall device performance to respective standards.
ATS Environmental Testing Lab
Applied Technical Services’ Environmental Testing Lab is a state-of-the-art facility that utilizes the latest technology to provide dependable results with quick turn-around times. ATS experts perform environmental testing daily and meticulously adhere to industry standards.
Quality Assurance
For more than 50 years, Applied Technical Services has been committed to providing our clients with the highest level of customer service. In doing so, our labs are certified and accredited with the following:
- A2LA – Mechanical Testing
- A2LA – Chemistry
- ISO/IEC 17025 – Calibrations
- ISO 9001-Certified Quality Management System
Request Form
"*" indicates required fields
EMI Links
- Conducted Emissions Testing
- Conducted Emission Testing Lab
- Conducted Susceptibility Testing Lab
- Electromagnetic Compliance Testing
- EMC Compliance Testing
- EMC Lab
- EMC Testing
- EMC Testing Lab
- EMI Compliance Testing
- EMI EMC Testing
- EMI EMC Testing Lab
- EMI Lab
- EMI Service Provider
- EMI Services
- EMI Testing
- EMI Testing Lab
- EMI Testing Services
- ESD Air Discharge Testing
- ESD Contact Discharge Testing
- ESD Lab
- ESD Testing
- ESD Testing Lab
- Level 5 Lightning Induced Transient Susceptibility Testing
- Lightning Induced Transient Testing
- MIL-DTL 81706 Testing
- Mil EMC Testing
- MIL STD 202G
- MIL STD 202G Method 301
- MIL-STD 461 EMI Testing
- MIL-STD 461 Testing
- MIL-STD 704 Testing
- MIL-STD 810 Acceleration Testing
- MIL-STD 810 Centrifuge Testing
- MIL-STD 810 Dust Testing Lab
- MIL-STD 810 Sand Testing
- Pre-Compliance EMC Testing
- Radiated Emission Testing
- Radiated Emission Testing Lab
- Radiated Susceptibility Testing Lab
- Reverberation Chamber Testing
- RTCA DO-160 4.0 Testing Lab
- RTCA DO-160 5.0 Testing Lab
- RTCA DO-160 6.0 Testing Lab
- RTCA DO-160 7.0 Testing Lab
- RTCA DO-160 8.0 Testing Lab
- RTCA DO-160 9.0 Testing Lab
- RTCA DO-160 10.0 Testing Lab
- RTCA DO-160 11.0 Testing Lab
- RTCA DO-160 EMI Testing