Meet the newest additions to the ATS family:
Anko Electronics
CPM Labs
The Calibration Solution
Product Evaluation Systems
Contact Form
Contact Form

RTCA DO-160 11.0 Fluids Susceptibility Testing Lab

Applied Technical Services (ATS)
/
/
RTCA DO-160 11.0 Fluids Susceptibility Testing Lab
You Are Here:
Applied Technical Services (ATS)
/
/
RTCA DO-160 11.0 Fluids Susceptibility Testing Lab
RTCA DO-160 11.0 Fluids Susceptibility Testing Lab

RTCA DO-160 11.0 Fluids Susceptibility Testing Lab

Applied Technical Services features a state-of-the-art RTCA DO-160 11.0 Fluids Susceptibility Testing Lab, capable of performing water ingress testing, waterproofness testing, fluids susceptibility testing, humidity testing, and additional types of environmental testing services.
Fluids Susceptibility Testing
Fluids susceptibility testing is done to determine the amount and extent of damage caused to a subject when it is exposed to liquids. This manner of testing can also be used to influence product design changes and improvements to prevent malfunction and failure caused by fluid exposure. Applied Technical Services conducts fluids susceptibility testing in accordance with RTCA DO-160 Fluids Susceptibility Testing standards in our advanced environmental testing facilities, offering several different types of testing for industries including automotive, aerospace, aviation, consumer electronics, manufacturing, building, and construction.
RTCA DO-160 Testing
With decades of experience serving as an aircraft testing and inspection provider, Applied Technical Services features an expansive list of environmental testing service offerings that are conducted in accordance with the Radio Technical Commission for Aeronautics’ DO-160 standard. This standard applies to all sizes of aircraft and must be complied with by all aircraft manufacturers in the US. ATS performs testing in adherence with the following sections of RTCA DO-160:

EMI and EMC Testing

  • Sec 15 Magnetic Effect Testing
  • Sec 16 Power Input Testing
  • Sec 17 Voltage Spike Testing
  • Sec 18 Audio Frequency Conducted Susceptibility Testing
  • Sec 19 Induced Signal Susceptibility Testing
  • Sec 20 Radio Frequency Susceptibility Testing – Radiated and Conducted
  • Sec 21 Emission of Radio Frequency Energy Testing – Radiated and Conducted
  • Sec 22 Lightning Induced Trans. Susceptibility Testing
  • Sec 25 Electrostatic Discharge – Air and Contact

Dynamics Testing

Temperature Testing

Environmental Testing

Additional Environmental Testing Services
Applied Technical Services performs many different types of environmental testing, including but not limited to:
  • Thermal Cycling Testing
  • Salt Fog Testing
  • Temperature Testing
  • UV Weathering Testing
  • Shock Testing
  • Flammability Testing
  • Waterproofness Testing
  • Salt Spray Testing
  • Coating Testing
  • Adhesion Testing
  • Accelerated Aging Testing
  • Abrasion Testing
  • Altitude Testing
  • Automotive Testing
  • Durability Testing
  • Corrosion Testing
Testing and Analysis Standards and Specifications
In addition to RTCA DO-160 and other standards set by the RTCA, ATS conducts testing, analysis, and inspection services in adherence with standards set by the following organizations:
  • Consumer Product Safety Commission - CPSC
  • International Organization for Standardization - ISO
  • American Association for Laboratory Accreditation - A2LA
  • National Aerospace and Defense Contractors Accreditation Program - NADCAP
  • The State of California - Proposition 65
  • German Institute for Standardization - DIN
  • The American Society for Testing and Materials – ASTM
  • American National Standards Institute - ANSI
  • Environmental Protection Agency Standards - EPA
  • United States Department of Defense – DOD
  • Institute of Electrical and Electronics Engineers - IEEE
  • The American Society of Mechanical Engineers - ASME
  • Registration, Evaluation, Authorization and Restriction of Chemicals – REACH (EU)
  • International Electrotechnical Commission - IEC
  • National Institute of Standards and Technology – NIST
  • Advanced Airlift Tactics Training Center - AATTC
  • Society of Automotive Engineers - SAE
Applied Technical Services: We Take a Closer Look
Here at Applied Technical Services, we take a closer look, determined to exceed the expectations and needs of our clients. Our internationally recognized quality assurance program ensures that our customers will receive the same level of exceptional service quality and customer service we have become known for over the past 55 years in business regardless of what department, location, or ATS company they are working with. We take pride in our commitment to excellence and are dedicated to continuing to improve our testing service offerings across the board as we expand our service network throughout the country, providing convenient laboratories and service centers to our customers around the world. Since our founding in 1967, ATS has become one of the nation’s leading industrial testing and analysis service providers, maintaining a long list of certifications and accreditations, including ISO 17025 accreditation, ISO 9001 certification, CESSNA authorization, EASA certification, and CPSC approval. We provide services for some of the country’s most reputable companies and organizations in industries including medical, automotive, building and construction, aerospace, lighting and electrical, aviation, pharmaceutical, power generation, military and defense, communication, renewable energy, oil and gas, and nuclear. Contact the proven experts at ATS today by clicking here or give us a call at 1 (888) 287-5227 to request a free quote on RTCA DO-160 11.0 Fluids Susceptibility Testing Lab services.

Request Form

Special Testing