Applied Technical Services is a shock and vibration testing and analysis provider, conducting several different types of dynamics testing in our RTCA DO-160 8.0 Vibration Testing Lab.
Vibration Testing
RTCA DO-160 Section 8.0 vibration testing consists of exposing a test subject, typically an electronic device, to a series of vibrations through the use of vibration testing and monitoring equipment. The different types and intensities of vibrations are determined by the test subject’s intended function and consist of either a specific set of vibrational patterns or a simulation of vibrations that the subject could experience in its operating environment or during transit and installation. Our lab capabilities include a standard vibration test, a short duration vibration test, and a robust vibration test.
Our additional vibration testing capabilities include:
- High Force Capabilities (6,000lbf – 12,000lbf)
- High Frequency Testing (5Hz – 2000Hz)
- Electrodynamic Shakers with Temperature and Humidity Control
- Shock Response Spectrum (SRS)
- Resonance Search and Dwell
- Classic Shock, Sine, Random, and Sine on Random
RTCA and EMI/EMC Lab
ATS maintains a highly advanced EMI and EMC testing lab, equipped with state-of-the-art technology and cutting-edge machinery to ensure the highest level of accuracy and precision. Our compatibility testing experts apply their unparalleled expertise to each test and have experience performing a broad range of electrical testing in accordance with many prominent testing standards. Our EMI and EMC testing experts also perform testing to client-specified parameters to meet our customers’ needs.
Applied Technical Services performs Section 8.0 Vibration testing in compliance with the conditions for airborne equipment standards set by the Radio Technical Commission for Aeronautics. This environmental testing standard applies to all sizes of aircraft and includes helicopters, supersonic transport aircraft, general aviation aircraft, and commercial airliners. Aircraft manufacturers adhere to standards set by the RTCA to ensure the safety and reliability of electronic systems in aircraft.
RTCA DO-160 and EMI and EMC Testing Capabilities
ATS’ other RTCA DO-160 testing services, as well as our EMI and EMC testing capabilities, include:
MIL STD 461
- RE 101, RE102 (up to 18 GHz)
- RS 101, RS 103 (up to 18 GHz, 200 V/m)
- CE 101, CE 102
- CS 114 – CS 118
MIL STD 704
- SAC – 400Hz 115V AC Single Phase
- TAC – 400Hz 115V AC Three Phase
- LDC – 28VDC
RTCA DO-160
- Sections 15-22, 25
- Section 20 Radiated/Conducted
- Section 21 Radiated/Conducted
- Section 22 (Levels 1-3)
Electrical Testing Services
In addition to the previously mentioned services, Applied Technical Services offers an expansive list of electrical testing services. Some of our most commonly requested services include:
- Voltage Drop Testing
- Electronic Product Testing
- Toy Battery Testing (ASTM)
- Resistivity Testing (ASTM)
- Conductivity Testing (ASTM)
- Contact Resistance Testing (MIL DTL)
- Dielectric Strength Testing (ASTM)
- Dielectric Constant Testing (ASTM)
Quality Assurance: We Take a Closer Look
Our internationally recognized quality assurance program is one of the many things that help ATS stand out from competitors. This quality assurance program establishes accountability at every level of our company, ensuring our clients receive the quality they expect.
Our highly trained staff apply the same level of care and attention to nondestructive aviation testing procedures as they do to chromatography testing services, prioritizing quality and accuracy over all else to achieve the results our clients depend on. We know that our clients value the fact that we take a closer look, and we continue to strive for improvement as we maintain the credibility and business relationships we have established over the course of over 55 years in business.
Applied Technical Services
Founded in 1967, ATS is proud to be one of the nation’s leading industrial testing and analysis service providers. We are CPSC-approved, EN71 compliant, ISO/IEC 17025:2017-accredited, and ISO 9001:2015 registered. We serve companies in industries including automotive, pulp and paper, aerospace, military and defense, manufacturing, and nuclear.
With our vast service network, ATS provides quality testing and analysis solutions to clients around the world while maintaining accurate reporting and expedient support. ATS performs services both in our advanced testing laboratories and in the field, providing an added level of convenience for our clients. In order to maximize the value of our services, ATS uses innovative technologies and practices to keep costs competitive.
Call +1 (888) 287-5227 to request a free quote for our services.
