ISO 12189 Fatigue Testing of Flexible Spinal Implants
The ATS Family of Companies (FoC) runs qualified medical device testing labs capable of evaluating spinal implant compliance with industry standard ISO 12189. The International Organization for Standardization (ISO) created standard 12189 for fatigue and biomechanical fatigue testing on flexible spinal implants. Unlike similar standards, the ISO standard considers the influence of anterior support on motion-preserving or vertebral fusion devices.
Why Choose ATS?
ATS FoC testing can enable clients to make superior products. Fatigue testing helps determine the strength of the spinal implant, so manufacturers can decide whether to alter the design or submit the product for FDA approval.
Before permitting in vivo testing, the FDA may require proof from a qualified lab that the device handles in vitro conditions. Poor implant design can cause pain and impact neurological function in the user. As an A2LA-accredited provider of medical device testing, the ATS FoC can deliver an unbiased and reliable assessment of the implant’s performance under cyclic loading.
Fatigue Testing
A fatigue test simulates the cyclic loads a product will encounter in the spine. To represent vertebrae and intervertebral discs in the intended spinal location, we use UHMWPE testing blocks and springs for test repeatability. Our fatigue testing equipment can deliver loading and unloading forces at a set frequency until the machine completes 5 million cycles or fatigue failure occurs. Fatigue failure arises when a load initiates a crack in the device that propagates until the assembly fractures.
Our powerful equipment can deliver loads that simulate worst-case scenarios and the repeat forces experienced in daily life:
- Load capacity up to 55 Kip
- Additional environmental controls, such as temperature from ambient to 1,000˚ C
We use fatigue testing to calculate the static and dynamic strength of the spinal implant by measuring how many cycles of a certain cyclic load until permanent deformation. This quantitative analysis helps manufacturers anticipate a product’s reactions to a variety of loading scenarios.
About ATS FoC
The ATS FoC operates multiple locations nationwide, allowing for more speedy and convenient shipping for laboratory testing or in-person inspections. Our experts use their decades of combined experience in medical device testing for thorough tests and analysis. We hold ISO 17025 certification to perform the following:
- Mechanical testing
- Nondestructive testing
- Chemical testing
- Electrical testing
- Calibrations
Call +1 (888) 287-5227 or complete the request form on this page to schedule ISO 12189 testing today.
Request Form
Medical Device Testing
ASTM Testing
- ASTM F1044 Shear Testing of CaP and Metallic Coatings
- ASTM F1160 Shear and Bending Fatigue of Coatings
- ASTM F1233
- ASTM F1264 Intramedullary Fixation Device Testing
- ASTM F1357 Articulating Total Wrist Implant Testing
- ASTM F1378 Shoulder Prostheses Testing
- ASTM F1541 ESFD Testing
- ASTM F1672 Patellar Prosthesis Testing
- ASTM F1714 Gravimetric Wear Assessment of Prosthetic Hip Design in Simulator Device Testing
- ASTM F1717 Spinal Implant Testing
- ASTM F1781 Elastomeric Flexible Hinge Finger Total Joint Implants Testing
- ASTM F1798 Spinal Implant Subassembly Testing
- ASTM F1820 Modular Acetabular Device Strength Testing
- ASTM F1829 Glenoid Locking Mechanism Shear Testing
- ASTM F1875 Fretting Corrosion Testing of Hip Implant Interfaces
- ASTM 2009 Modular Prostheses Taper Connection Testing
- ASTM F2025 Wear Assessment of Polymeric Components
- ASTM F2028 Glenoid Loosening Testing
- ASTM F2077 Intervertebral Body Fusion Device Testing
- ASTM F2183 Small Punch Testing
- ASTM F2193 Spinal Fixation Components
- ASTM F2267 Measuring Subsidence of Intervertebral Fusion Devices
- ASTM F2346 Standard and Dynamic Testing of Artificial Intervertebral Discs
- ASTM F2423 Wear and Fatigue Testing of Total Disc Prostheses
- ASTM F2502 Absorbable Plate and Screw Testing
- ASTM F2554 CAS System Precision Testing
- ASTM F2624 Static, Dynamic, and Wear Testing of Extra-Discal Spinal Implants
- ASTM F2624 Spinal Implant Dynamic Testing
- ASTM F2694 Lumbar Total Facet Prosthesis Testing
- ASTM F2706 Spinal Implant Fatigue Testing
- ASTM F2789 Mechanical and Functional Characterization of Nucleus Devices
- ASTM F2790 Static and Dynamic Testing of Total Facet Prostheses
- ASTM F382 Metallic Bone Plates Testing
- ASTM F384 Angled Orthopedic Fixation Testing
- ASTM F543 Metallic Medical Bone Screw Testing
- ASTM F564 Metallic Bone Staple Testing
ISO Testing
- Biocompatibility Testing for Medical Devices ISO 10993
- ISO-10328 Structural Testing of Lower Limb Prosthetics
- ISO 10993 Biocompatibility
- ISO 10993 Biocompatibility Testing
- ISO 10993 Testing
- ISO 10993 Testing Lab
- ISO 18192-1 Wear Testing for Intervertebral Disc Prostheses
- ISO 12189 Fatigue Testing of Flexible Spinal Implants
Medical Device Testing
- Fatigue Testing Lab
- Implant Testing
- Material Testing Laboratory
- Material Device Regulatory Compliance Testing
- Medical Device Testing
- Medical Device Testing Certification
- Medical Device Materials Testing
- Medical Device Materials Testing Consulting
- Medical Device Mechanical Testing
- Medical Device Mechanical Testing Regulations
- Medical Device Performance Testing
- Medical Device Product Testing
- Medical Device Reliability Testing
- Medical Device Standards Testing
- Medical Device Standards Testing Certifications
- Medical Device Testing Companies
- Medical Device Testing Services
- Medical Device Testing Lab
- Medical Implant Testing Lab
- Orthopedic Device Approval Testing
- Orthopedic Device Testing
- Prosthetic Testing
- Prosthetic Testing Services
- Prosthetic Testing Services
- Spinal Implant Testing