ATS’ Mechanical Testing Department provides proof load testing. A proof load test evaluates different devices to ensure they are meeting the appropriate weight bearing capabilities. This test is vital to making sure components are meeting the safety requirements put in place. Proof load tests should be conducted on new devices before being placed in service, or to determine if current equipment is still performing to set expectations. This test should be performed more often if the piece of equipment is safety critical, such as lifting people.
Proof Load Testing Applies to the Following Devices:
- Chain blocks
- Cranes
- Fasteners
- Hoists
- Jacks
- Lifting equipment
- Lifting Tackle
- Motor vehicle lifts
- Scissor Lifts
- Sling Chain
- Synthetic or wire ropes
- Web Sling
- Winches
We Test to Specific Standards
Applied Technical Services is a third-party testing provider that tests to either industry specific codes and standards such as, API, ASME, ANSI, NBIC or customer published guidelines. Our experts will observe your equipment to ensure its abilities conform to industry standards.
Standards that Require Load Testing
| Standard | Pertains To |
|---|---|
| ASME B30.9 | Lifting Slings |
| ASME B30.10-1.7 | Hooks |
| ASME B30.16 | Overhead Hoists |
| ASME B30.17 | Overhead and Gantry Cranes and Trolleys |
| ASME B30.20 | Various Below-the Hook Lifting Devices |
| ASME B30.20 | Manual Lever Hoists |
| ASME B30.26 | Various Lifting Accessories |
| ANSI N14.6 | Special Lifting Devices for Shipping Containers for nuclear materials weighting >4500kg |
| OSHA Section 1926.251 | Special Custom Lifting Accessories that should be Tested Prior to use to 125% of WLL (Working Load Limit) |
Quality Assurance
Our ISO 9001:2015 registered Quality System allows Applied Technical Services to consistently provide high quality tests. This system supports our quality policy and its continuous improvement through measurable objectives. Each employee is dedicated to being involved in our quality improvement process.
We Meet Customer Needs by Providing
- Clear and accurate data
- Professional services delivered in a timely manner
- Qualified, equipped and engaged employees
- Services in accordance with applicable standards and specifications
ATS Adheres to the Following Quality Standards
- ANSI/NCSL Z540-1 — General Requirements for Calibrations Laboratories and Measuring and Testing Equipment
- ASME NQA-1 — Quality Assurance Requirements for Nuclear Facility Applications
- ISO/IEC 17025 — General Requirements for Competence of Testing and Calibrations Laboratories
- 10 CFR 50 Appendix B — Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants
- 10 CFR Part 21 — Reporting of Defects and Noncompliance
- ISO 9001:2015 — Requirements for Quality Management Systems
