Applied Technical Services’ calibrations department offers pin gage/plug gage calibrations.
Pin Gages/Plug Gages
Pin gages/Plug Gages are a simple precision measurement tool that is very effective in measuring a hole diameter to a high degree of accuracy. To ensure the quality of your gages, they should be scheduled regularly for calibration services. ATS can calibrate pin gages/plug gages up to 12 inches in diameter. Our department is also capable of calibrating other gages including go/no go, ring, plug, and thread.
Popular Manufacturers
- Glastonbury
- Meyer
- Starrett
- Vermont
Calibrations Standards Lab
Applied Technical Services’ Calibration Standards Lab can conduct calibrations of your test and measurement equipment in our environmentally controlled laboratories. Our lab temperature is maintained at approximately 68 +/- 2.0° F and humidity controlled at 30-55% RH. To reduce any vibration effects, the lab also has isolation joints in the flooring.
For in-house calibration orders, ATS will meet or exceed a 5 to 7 day turnaround. In addition, we can offer a one stop shop for your equipment calibration needs due to our diverse capabilities and our network of quality approved vendors. Applied Technical Services also provides a web-based interface, iPortal, for your convenience. Through this tool, you can gain access to electronic copies of calibration certifications, current equipment status, history of service and due date reports for your equipment.
All ATS Calibrations
- Include As Found and As Left Data
- Traceable to NIST (National Institute of Standards and Technology)
- Performed in accordance with documented and controlled procedures
About ATS
Applied Technical Services has been providing services for over 50 years to a variety of industries. Since our founding we have developed an excellent reputation for our high-quality consulting engineering, testing, and inspections services. ATS maintains an ISO 9001:2015-registered Quality System that certifies our commitment to providing high quality services. This system allows us to implement our quality policy and its improvement through measurable goals.
How We Meet Customer Needs
- Clear and accurate data
- Professional services delivered in a timely manner
- Qualified, equipped and engaged employees
- Services in accordance with applicable standards and specifications
ATS Complies with Quality Standards
- 10 CFR 50 Appendix B – Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants
- ASME NQA-1 – Quality Assurance Requirements for Nuclear Facility Applications
- ANSI/NCSL Z540-1 – General Requirements for Calibrations Laboratories and Measuring and Testing Equipment
- ISO/IEC 17025 – General Requirements for Competence of Testing and Calibrations Laboratories
- ISO 9001:2015 – Requirements for Quality Management Systems
- 10 CFR Part 21 – Reporting of Defects and Noncompliance
