The goal of mechanical testing is to evaluate the properties of materials as they are subjected to physical stresses and pressures. Through this process, we can pinpoint the location and source of weak points that develop plastic deformation, fractures, and cracks that can lead to structural failure.
Our Mechanical Testing Services
ATS offers an extensive range of mechanical tests – including some of the most frequently requested test types listed below:
Fatigue Testing
Fatigue testing evaluates a material’s resistance to cyclic loading under various frequencies, loads, and environmental conditions. Fatigue tests are usually conducted to determine the number of cycles to failure.
Hardness Testing
Hardness Testing determines a material’s resistance to indentation. Hardness testing measures the indentation’s permanent depth while using a predetermined force and indenter. A variety of scales, each representing a specific indenter type and load combination, are used.
Tensile Testing
Tensile Testing measures tensile strength by applying a load in opposite directions at certain amounts. This test is usually performed to failure, depending on the standard. Other properties measurable by tensile testing include yield strength, percent elongation, and reduction of area.
Impact Testing
The two main types of impact tests are Charpy and Izod. Charpy impact testing mainly evaluates metallic materials, while the Izod impact testing method primarily tests plastics.
These methods assess impact properties such as toughness, ductility, and brittleness by using a pendulum-type striker to swing and strike the material. We measure the energy absorbed by the samples to evaluate material toughness. Tests can also be conducted at various temperatures to evaluate the influence of the service environment on material behavior.
ATS – Your Preferred Testing Service Provider
Whether it is life cycle testing of playground slides or performance testing of automotive steering pumps, ATS has the experience and capabilities to satisfy your needs. Our lab holds ISO/IEC 17025:2017 (A2LA) accreditations for a variety of mechanical tests.
Contact ATS today for more information on our mechanical testing capabilities. Each service is complemented by detailed reports, quick turnaround times, and helpful client support. ATS – We take a closer look!
Mechanical Testing Capabilities
- Anchor Pull Testing
- Coating Inspection Services
- Strain Gauging
- Pressure Testing
- Weld Testing (ASME, AWS, PED/EN, API)
- Welder Qualification
- Weld Procedure Qualification
- Helium Leak Testing
- Drop Weight Testing
- Compression Testing
- Shear Testing
- Bend Testing
- Torque / Torsion Testing
- Stress Rupture
- Hydrogen Embrittlement Testing
- Fastener Testing
- Customized Product Testing
- In-house Machining / Specialty Fabrication
Contact Us
If you need mechanical testing on your products, materials, or components, contact us! Call +1 (888) 287-5227 to speak with a representative about our lab capabilities or click here to submit a request webform.
