- Home
- Services/IndustriesServicesindustries
- About Us
- LocationsStatesAccordion ContentAccordion ContentAccordion ContentAccordion Content
- Job Openings
- Quick Links
- ATS Family
Acceleration Testing
Applied Technical Services provides Acceleration Testing to help clients verify that their device or materiel can withstand steady-state inertia loads.
What is MIL-STD-810 Method 513?
MIL-STD-810 Acceleration Testing is a procedure that evaluates the structural integrity and viability of devices and materiels during and after high g-loads. Manufacturers may request this test for materiels installed in helicopters, aircraft, aerospace vehicles, and ground/sea launched missiles. Method 513 encompasses a wide variety of materiels in its tests. The testing conditions vary depending on the materiel under test to more closely replicate their intended service environment. The standard requires technicians to tailor the test to each specific materiel being tested.
How does MIL-STD-810 Acceleration Testing Work?
While the test varies depending on the materiel under test, the procedures remain largely the same. Section 2 of the Military Standard 810 provides formulas for determining g-loads for fighter aircraft due to the high roll and pitch rates as well as tables of recommended g-loads for helicopters, aerospace vehicles, and ground/sea launched missiles. The procedures of the test are as follows:
- Procedure 1 – Structural Test – The device or materiel is subjected to a specified g-level while not in operation.
- Procedure 2 – Operational Test – The device or materiel is subjected to a specified g-level while in operation
- Procedure 3 – Crash Hazard Acceleration Test – The device or materiel is subjected to very high non-operational g-loads to ensure they do not become a hazard in the event of a crash
Once testing is complete, ATS experts will evaluate the device to assess several properties such as visual damage, electrical and heating performance, and overall device performance to standards.
Applied Technical Services Quality Service
Applied Technical Services has been providing high-quality customer service for more than 50 years. The experts at ATS will ensure detailed and accurate reports. Our labs hold the following accreditations and certifications:
- A2LA – Mechanical Testing
- A2LA – Chemistry
- ISO/IEC 17025 – Calibrations
- ISO 9001-Certified Quality Management System
Request Form
"*" indicates required fields
EMI Links
- Conducted Emissions Testing
- Conducted Emission Testing Lab
- Conducted Susceptibility Testing Lab
- Electromagnetic Compliance Testing
- EMC Compliance Testing
- EMC Lab
- EMC Testing
- EMC Testing Lab
- EMI Compliance Testing
- EMI EMC Testing
- EMI EMC Testing Lab
- EMI Lab
- EMI Service Provider
- EMI Services
- EMI Testing
- EMI Testing Lab
- EMI Testing Services
- ESD Air Discharge Testing
- ESD Contact Discharge Testing
- ESD Lab
- ESD Testing
- ESD Testing Lab
- Level 5 Lightning Induced Transient Susceptibility Testing
- Lightning Induced Transient Testing
- MIL-DTL 81706 Testing
- Mil EMC Testing
- MIL STD 202G
- MIL STD 202G Method 301
- MIL-STD 461 EMI Testing
- MIL-STD 461 Testing
- MIL-STD 704 Testing
- MIL-STD 810 Acceleration Testing
- MIL-STD 810 Centrifuge Testing
- MIL-STD 810 Dust Testing Lab
- MIL-STD 810 Sand Testing
- Pre-Compliance EMC Testing
- Radiated Emission Testing
- Radiated Emission Testing Lab
- Radiated Susceptibility Testing Lab
- Reverberation Chamber Testing
- RTCA DO-160 4.0 Testing Lab
- RTCA DO-160 5.0 Testing Lab
- RTCA DO-160 6.0 Testing Lab
- RTCA DO-160 7.0 Testing Lab
- RTCA DO-160 8.0 Testing Lab
- RTCA DO-160 9.0 Testing Lab
- RTCA DO-160 10.0 Testing Lab
- RTCA DO-160 11.0 Testing Lab
- RTCA DO-160 EMI Testing