Implant Testing
The ATS Family of Companies (FoC) offers a range of implant testing methods for medical devices. Medical implants replace or support the function of a body part to relieve pain, restore motion, and monitor health. Implants can consist of metals, plastics, and ceramics, which impact the device’s performance and qualities.
Regulatory bodies, such as the FDA, strictly control the medical implants available in the market. As such, implant manufacturers and distributors require third-party medical device testing labs to verify an implant follows regulatory controls. A2LA-accredited ATS FoC medical device labs frequently work with components and assemblies for spinal, dental, joint, and extremity implants.
Medical Implant Testing Lab
The ATS FoC provides fatigue and mechanical tests according to ASTM and ISO standards. We can also follow non-standard and custom testing procedures tailored to client specifications. Some of these tests include:
- Compression
- Fatigue
- Fracture Toughness
- Fretting Corrosion
- Life Cycle
Our rigorous lab testing allows manufacturers to test a device under worst-case scenarios and extreme conditions. Additionally, mechanical tests provide information about the characteristics of the device and its materials.
Manufacturers may request in vitro testing throughout the development of a medical device until the device is ready for FDA submission. When implanted in a body, the device must endure repeating loading cycles, movements, and conditions expected of its intended location. Implant testing in vitro assesses performance under isolated conditions to determine properties and resistance to deformation, corrosion, and other potential failures.
Medical Device Testing with ATS FoC
The ATS FoC developed as a nationwide network of accredited labs staffed by experts. We are A2LA-accredited to perform ISO/IEC 17025 tests: mechanical testing, electrical testing, chemical testing, nondestructive testing, and calibrations. With over fifty years of operation behind us, ATS is known for our high-quality customer service, responsiveness, and reliability to help clients make informed business decisions and reach the market faster.
Call +1 (888) 287-5227 or complete the form on this page to request implant testing with professionals from the ATS FoC.
Request Form
Medical Device Testing
ASTM Testing
- ASTM F1044 Shear Testing of CaP and Metallic Coatings
- ASTM F1160 Shear and Bending Fatigue of Coatings
- ASTM F1264 Intramedullary Fixation Device Testing
- ASTM F1357 Articulating Total Wrist Implant Testing
- ASTM F1378 Shoulder Prostheses Testing
- ASTM F1541 ESFD Testing
- ASTM F1672 Patellar Prosthesis Testing
- ASTM F1714 Gravimetric Wear Assessment of Prosthetic Hip Design in Simulator Device Testing
- ASTM F1717 Spinal Implant Testing
- ASTM F1781 Elastomeric Flexible Hinge Finger Total Joint Implants Testing
- ASTM F1798 Spinal Implant Subassembly Testing
- ASTM F1820 Modular Acetabular Device Strength Testing
- ASTM F1829 Glenoid Locking Mechanism Shear Testing
- ASTM F1875 Fretting Corrosion Testing of Hip Implant Interfaces
- ASTM 2009 Modular Prostheses Taper Connection Testing
- ASTM F2025 Wear Assessment of Polymeric Components
- ASTM F2028 Glenoid Loosening Testing
- ASTM F2077 Intervertebral Body Fusion Device Testing
- ASTM F2183 Small Punch Testing
- ASTM F2193 Spinal Fixation Components
- ASTM F2267 Measuring Subsidence of Intervertebral Fusion Devices
- ASTM F2346 Standard and Dynamic Testing of Artificial Intervertebral Discs
- ASTM F2423 Wear and Fatigue Testing of Total Disc Prostheses
- ASTM F2502 Absorbable Plate and Screw Testing
- ASTM F2554 CAS System Precision Testing
- ASTM F2624 Static, Dynamic, and Wear Testing of Extra-Discal Spinal Implants
- ASTM F2624 Spinal Implant Dynamic Testing
- ASTM F2694 Lumbar Total Facet Prosthesis Testing
- ASTM F2706 Spinal Implant Fatigue Testing
- ASTM F2789 Mechanical and Functional Characterization of Nucleus Devices
- ASTM F2790 Static and Dynamic Testing of Total Facet Prostheses
- ASTM F382 Metallic Bone Plates Testing
- ASTM F384 Angled Orthopedic Fixation Testing
- ASTM F543 Metallic Medical Bone Screw Testing
- ASTM F564 Metallic Bone Staple Testing
ISO Testing
- Biocompatibility Testing for Medical Devices ISO 10993
- ISO-10328 Structural Testing of Lower Limb Prosthetics
- ISO 10993 Biocompatibility
- ISO 10993 Biocompatibility Testing
- ISO 10993 Testing
- ISO 10993 Testing Lab
- ISO 18192-1 Wear Testing for Intervertebral Disc Prostheses
- ISO 12189 Fatigue Testing of Flexible Spinal Implants
Medical Device Testing
- Fatigue Testing Lab
- Implant Testing
- Material Testing Laboratory
- Material Device Regulatory Compliance Testing
- Medical Device Testing
- Medical Device Testing Certification
- Medical Device Materials Testing
- Medical Device Materials Testing Consulting
- Medical Device Mechanical Testing
- Medical Device Mechanical Testing Regulations
- Medical Device Performance Testing
- Medical Device Product Testing
- Medical Device Reliability Testing
- Medical Device Standards Testing
- Medical Device Standards Testing Certifications
- Medical Device Testing Companies
- Medical Device Testing Services
- Medical Device Testing Lab
- Medical Implant Testing Lab
- Orthopedic Device Testing
- Prosthetic Testing
- Prosthetic Testing Services