- Home
- Services/IndustriesServicesindustries
- About Us
- LocationsStatesAccordion ContentAccordion ContentAccordion ContentAccordion Content
- Job Openings
- Quick Links
- ATS Family

Mold Inspection and Testing
Mold inspection and testing uncover the source and extent of mold spread in commercial buildings that cannot be easily reached or cleaned. Mold grows where moist, humid air hits cold surfaces with high relative humidity (RH) compared to their surroundings. Areas of poor circulation, low insulation, and condensation are especially at risk for mold problems.
Mold produces mold spores that are responsible for the spread of mold on porous surfaces and in the air. When mold spores are inhaled, people can develop a range of adverse symptoms that mimic asthma or an allergic reaction:
- Itchy eyes and throat
- Coughing
- Headache
- Fever
- Skin rash
Long-term or high-intensity exposure to mold has dire effects:
- Fatigue
- Respiratory problems
- Lung infection
- Internal bleeding
Mold can grow on building materials like wood, tile, and drywall surfaces or in air ducts and vents. The greatest mold growth occurs in moist and undisturbed locations, particularly around plumbing. Mold and rot can wreak havoc on the integrity of your building, causing a leaky roof, a collapsed beam, or worse.
ATS Inspections and Testing
We recommend you get a mold inspection:
- When moving to a new building, especially if it has been unoccupied or derelict
- When renovating or restoring an older building
- After water damage
- When mold spreads beyond a 10 ft² area
Our service covers the discovery, treatment, and monitoring of mold remediation in an end-to-end single contract for your convenience and peace of mind.
Our Indoor Environmental Professionals (IEPs) assess your site for the presence and extent of visible mold, potential sources, indoor air quality complaints, and the potential impacts of mold on air quality and building safety. Bulk samples of mold allow us to determine the type of mold found at your location. Additionally, we can take air samples to assess if mold spores are present.
From there, we craft a cost-effective response delivered by our professionals or a trusted contractor. We offer worksite observations to ensure our contractors meet your standards.
Standards and Regulation
Currently, no federal law exists for mold remediation and removal. Our professionals follow local and state laws for mold remediation. Additionally, we comply with EPA, OSHA, and IICRC guidelines:
- EPA Mold Remediation in Schools and Commercial Buildings Guide
- IICRC S500 Standard and Reference Guide for Water Restoration
- IICRC S520 Standard and Reference Guide for Mold Remediation
About ATS
ATS provides high-quality testing, calibration, and inspection services to clients in a variety of industries across the country. We work with our growing network of family companies for data-driven analysis and discovery. From our humble beginnings in 1967 to our international presence today, we have always committed to bringing our clients detailed results with a quick turnaround.
ATS Quality and Certifications
ATS prides itself on strict standards for high-caliber and timely results from our licensed specialists. Our mission of excellence has earned us an outstanding reputation among our clients in the business, construction, and manufacturing professions.
The company has earned numerous certifications, including:
- ISO/IEC 17025:2017(A2LA)
- NADCAP Non-Destructive Testing
ATS meets Quality Management standard ISO 9001:2015 for continuous inspection and improvement in all our systems.
Contact ATS
Do not wait for a load-bearing wall to rot before scheduling a mold inspection. Call +1 (888) 287-5227 for mold inspection and testing at your convenience.

Request Form
Engineering Links
- Asbestos Abatement Plan Design
- Asbestos Survey and Consulting Services
- ASME B30.10 Crane Hook Inspections
- Atlanta Lightning Protection
- Bridge Inspection Companies
- Bridge Structural Steel Weld Inspections
- Building Envelope Consultants
- Building Envelope Consulting Services
- Building Envelope Engineering
- Building Envelope Testing
- Building Inspection Company
- California Scaffold Inspections
- Commercial Engineering Services
- Commercial Structural Engineer Inspection
- Construction Materials Testing
- Consulting Structural Engineering Services
- Engineering Consulting Services
- EPA Certified Lead Abatement Contractors
- Equipment Failure Analysis
- Exposed Structure
- Fall Hazard Training
- Fall Protection Equipment Inspection
- Fit for Service - FFS Assessment
- Fitness for Service
- Flood Damage Inspections
- GPR Contractors
- GPR Inspection Services
- GPR Scanning Concrete
- GPR Scanning Services
- Ground Penetrating Radar (GPR) Survey
- High Energy Piping
- HVAC System Evaluation
- Indoor Air Quality Assessment
- Indoor Air Quality Experts
- Indoor Air Quality Measurement
- Lead Abatement Contractors
- Lightning Protection for Building Design
- Lightning Protection Services
- Marine Structural Engineer
- Mold Inspection and Testing
- Mold Testing Companies
- NACE Coating Inspector
- Parking Structure Repair
- Penstock Inspections
- Professional Mold Testing
- Property Condition Assessment Consultants
- RBI - Risk Based Inspections
- Roof Fall Prevention Systems
- Roof Fall Protection
- Safety Harness Inspections
- Storm Structural Evaluations Engineering
- Structural Design Services
- Structural Engineering
- Structural Engineering Services
- UT and Phased Array Bridge Inspections
- Washington DC Lightning Protection
- Water Damage Inspection