ASTM F2193 Spinal Fixation Components
The ATS Family of Companies (FoC) provides ASTM F2193 testing for spinal fixation devices, such as spinal screws, rods, and plates. ASTM F2193 sets consistent terminology, specifications, and testing methods for spinal components across the medical device manufacturing industry.
What is ASTM F2193?
ASTM F2193 provides a standard language for defining a device’s geometry, dimensions, classification, material specifications, and performance. The standard’s consistent labeling and testing methods help surgeons make informed decisions when selecting spinal implant components. ASTM F2193 describes proper handling and packaging of the spinal components. This standard also requires labels for all components to include the following:
- Mechanical behavior
- Material properties
- Terminology
- Dimensions
- Size
- Instrumentation
Finally, ASTM F2193 describes the testing methods to determine static and dynamic characteristics of a spinal component to anticipate the device’s short-term stability until complete arthrodesis.
ASTM F2193 includes four annexes that explain the motivation and procedures for 4-point bend tests and static and fatigue strength measurements. The first annex describes performance tests for determining driving torque and axial pull-out load. Meanwhile, the other three annexes detail specifications for a 4-point bend test based on the component.
Bend Testing with ATS FoC
Our medical device testing lab houses state-of-the-art machines for rigorous testing conditions and precise measurements. When evaluating spinal components, we perform static testing by applying a load at a constant rate until failure. Meanwhile, our fatigue tests involve sinusoidal cyclic loads applied at a constant frequency until failure or reaching the runout limit. We can adjust the fluid, temperature, and other conditions that impact a component’s performance in vivo to meet client specifications.
We use ASTM F2193 tests to help clients compare a component’s fatigue characteristics with other designs. Our experts also use static and fatigue tests to uncover a component’s properties:
- Bending stiffness
- Bending structural stiffness
- Bending yield moment
- Bending fatigue moment
- Bending ultimate moment
About the ATS FoC
The ATS FoC operates multiple ISO/IEC 17025 accredited labs that regularly perform calibrations and mechanical, nondestructive, chemical, and electrical tests. Our experts draw on decades of combined experience with medical device testing to deliver quick and reliable services that help manufacturers reach the market faster.
Please call +1 (888) 287-5227 or complete the request form on this page for ASTM F2193 static and fatigue testing on your spinal components.
Request Form
Medical Device Testing
ASTM Testing
- ASTM F1044 Shear Testing of CaP and Metallic Coatings
- ASTM F1160 Shear and Bending Fatigue of Coatings
- ASTM F1233
- ASTM F1264 Intramedullary Fixation Device Testing
- ASTM F1357 Articulating Total Wrist Implant Testing
- ASTM F1378 Shoulder Prostheses Testing
- ASTM F1541 ESFD Testing
- ASTM F1672 Patellar Prosthesis Testing
- ASTM F1714 Gravimetric Wear Assessment of Prosthetic Hip Design in Simulator Device Testing
- ASTM F1717 Spinal Implant Testing
- ASTM F1781 Elastomeric Flexible Hinge Finger Total Joint Implants Testing
- ASTM F1798 Spinal Implant Subassembly Testing
- ASTM F1820 Modular Acetabular Device Strength Testing
- ASTM F1829 Glenoid Locking Mechanism Shear Testing
- ASTM F1875 Fretting Corrosion Testing of Hip Implant Interfaces
- ASTM 2009 Modular Prostheses Taper Connection Testing
- ASTM F2025 Wear Assessment of Polymeric Components
- ASTM F2028 Glenoid Loosening Testing
- ASTM F2077 Intervertebral Body Fusion Device Testing
- ASTM F2183 Small Punch Testing
- ASTM F2193 Spinal Fixation Components
- ASTM F2267 Measuring Subsidence of Intervertebral Fusion Devices
- ASTM F2346 Standard and Dynamic Testing of Artificial Intervertebral Discs
- ASTM F2423 Wear and Fatigue Testing of Total Disc Prostheses
- ASTM F2502 Absorbable Plate and Screw Testing
- ASTM F2554 CAS System Precision Testing
- ASTM F2624 Static, Dynamic, and Wear Testing of Extra-Discal Spinal Implants
- ASTM F2624 Spinal Implant Dynamic Testing
- ASTM F2694 Lumbar Total Facet Prosthesis Testing
- ASTM F2706 Spinal Implant Fatigue Testing
- ASTM F2789 Mechanical and Functional Characterization of Nucleus Devices
- ASTM F2790 Static and Dynamic Testing of Total Facet Prostheses
- ASTM F382 Metallic Bone Plates Testing
- ASTM F384 Angled Orthopedic Fixation Testing
- ASTM F543 Metallic Medical Bone Screw Testing
- ASTM F564 Metallic Bone Staple Testing
ISO Testing
- Biocompatibility Testing for Medical Devices ISO 10993
- ISO-10328 Structural Testing of Lower Limb Prosthetics
- ISO 10993 Biocompatibility
- ISO 10993 Biocompatibility Testing
- ISO 10993 Testing
- ISO 10993 Testing Lab
- ISO 18192-1 Wear Testing for Intervertebral Disc Prostheses
- ISO 12189 Fatigue Testing of Flexible Spinal Implants
Medical Device Testing
- Fatigue Testing Lab
- Implant Testing
- Material Testing Laboratory
- Material Device Regulatory Compliance Testing
- Medical Device Testing
- Medical Device Testing Certification
- Medical Device Materials Testing
- Medical Device Materials Testing Consulting
- Medical Device Mechanical Testing
- Medical Device Mechanical Testing Regulations
- Medical Device Performance Testing
- Medical Device Product Testing
- Medical Device Reliability Testing
- Medical Device Standards Testing
- Medical Device Standards Testing Certifications
- Medical Device Testing Companies
- Medical Device Testing Services
- Medical Device Testing Lab
- Medical Implant Testing Lab
- Orthopedic Device Approval Testing
- Orthopedic Device Testing
- Prosthetic Testing
- Prosthetic Testing Services
- Prosthetic Testing Services
- Spinal Implant Testing