- Home
- Services/Industries
Services
industries
- About Us
- Locations
- Job Openings
- Quick Links
- ATS Family

Feeler Gage Calibration
Applied Technical Services Standards lab can perform Feeler Gage calibration in our state-of-the-art calibration laboratories. Feeler gages are a type of thickness gage used to measure small gaps between surfaces. The tool has several blades or leaves at varying specified thicknesses. Feeler gages are typically made of stainless or tempered steel to prevent rusting.
The ATS Standards Lab
The ATS Dimensional Lab lives within a room designed for high precision environmental control. The lab is maintained at 68 ° F within +/- 2.0 ° F and the resting humidity stays within a range of 30-55% as appropriate. The lab floor contains isolation joints that reduce any effects caused by vibrations. Feeler gages are thoroughly cleaned and placed into the Dimensional lab to stabilize to a specific temperature for at least 24 hours before calibration begins.
Quality Assured
At Applied Technical Services, our team of experts is dedicated to providing the highest quality service. Our labs are ISO 9001 certified and ISO/IEC 17025 accredited to calibrate gage blocks. All gage blocks are certified to their original manufacturer grade tolerance per the following Federal specifications:
- GGG-G-15C
- ANSI/ASME B89.1.9M-1984
- ANSI/ASME B89.1.9M-2002
Mechanical Calibration Links
- ABBE Refractometer Calibration
- Accelerometer Calibration
- Adjustable Thread Calibration
- Air Flow Calibration
- Air Gas Flow Meter Calibration
- Ardrox DLM 1000 Radiometer Calibration
- ATC Refractometer Calibration
- Backflow Test Gauge Calibration
- Balance Calibrations
- Barfield 1811D Calibration
- Barfield DPS-350 Calibration
- Cable Tensiometer Calibration
- Caliper Calibration
- CDI Torque Wrench Calibrations
- Colorimeter Calibration
- Countersink Gage Calibration
- Craftsman Torque Wrench Calibration
- Crane Scale Calibration
- Crimp Tool Calibration
- CT Dimensional Inspections
- Cylindrical Ring Gage Calibration
- Dial Indicator Calibration
- Digital Scale Calibration
- Digital Voltmeter Calibration
- Dillon Dynamometer Calibration
- Durometer Calibration
- Durometer Hardness Tester Calibration
- Dyer Calibration Services
- Dynamometer Calibration
- Feeler Gage Calibration
- Fixed Gaging
- Flow Meter Calibration Services
- Fluke Meter Calibration
- Fluke Multimeter Calibrations
- Force, Pressure, Torque Calibration
- Fred V Fowler Calibration Services
- Gage Block Calibration
- Gage Calibration
- Gauge Block Calibration
- Gloss Meter Calibration
- Hand Tool Calibrations
- Height Gage Calibration
- Holiday Detector Calibration
- ISO 16023-21 Accelerometer Calibration Services
- Jamar Dynamometer Calibration
- KJ Law Engineers Conductivity Meter Calibrations
- Magnetic Flow Meter Calibration
- Mahr-Federal Calibration Services
- Mems-3 Axis Accelerometer Calibration
- Metrology Equipment
- Metrology Equipment For Sale
- Metrology Lab
- Micro Motion Flow Meter Calibration
- Micrometer Calibration
- Microscope Calibration Services
- Mitutoyo Calibration Services
- Pin Gage Calibration
- Pin Gage/Plug Gage Calibration
- Plastometer Calibration
- Portable Hardness Tester Calibration
- Pressure Gauge Calibration
- Pressure Relief Valve Calibration
- Pressure Transducer Calibration
- Proto Torque Wrench Calibration
- Radius Gage Calibration
- Refractometer Calibration
- Rotameter Calibration
- Snap-On Torque Wrench Calibration
- Southwire Meter Calibration
- Spectroline DSE-100x Radiometer Calibrations
- Spring Tester Calibration
- Starrett Calibration and Distribution
- Sun-Tec Corp Calibration and Distribution
- Tape Measure Calibration
- Tool Calibrations
- Torque Calibrations
- Torque Transducer Calibration
- Torque Wrench Calibration
- Ultrasonic Flow Meter Calibration
- Ultrasonic Thickness Gage Calibration
- Vacuum Gage Calibration
- Vernier Dial and Digital Caliper Calibration Services
- Viscometer Calibration
- Weight Calibration
- Wire Crimp Pull Tester Calibration
- X-Ray Metrology